BIL95KV Single Phase Pole Mounted Transformer-Pole Mounted Transformers

BIL95KV Single Phase Pole Mounted Transformer

Cover-mounted high voltage porcelain bushings

7200/12470Y, 7620/13200Y, 8320/14400Y

Manufactured in accordance to ANSI-57.12.00, IEC-76 and NEMA standards

Ratings 5-500kVA 50Hz or 60Hz

Low voltages: 120/240V, 240/480V, 231V, 277V

Mild Steel tank, 304 Stainless Steel tank optional

Mineral Oil, Natural Ester Oils Optional

Silicon Steel Core, Amorphous Metal Core Optional

Conventional Type, CSP type optional

STANDARD FEATURES
−−Core and coils designed for an optimum Total Ownership Cost (TOC)
−−Wound core with step-lap joints for increased efficiency and lower noise levels
−−“Low-high-low” windings for increased short circuit strength, efficiency and thermal strength
−−“Low-high-low” windings for increased short circuit strength, efficiency and thermal strength
−−Computer aided design for mechanical & electrical calculations (C.A.D.)
−−Paint system meeting or exceeding the performance of the IEEE C57.12.28 Standard
−−Lifting lugs meeting all of the requirements of the CSA C2.1-06 and CSA C2.2-06 Standard
−−Multiple cover clamps to ensure proper sealing and to mini-mize water retention on the cover edge
−−Cover or sidewall mounted high voltage bushing(s) as required
−−Low voltage spade or clamp type (basket) terminals as required
−−Provision for surge arrester bracket, bracket available as an option
−−Automatic self-resealing pressure relief valve

OPTIONAL PRODUCT ACCESSORIES
Cold-Rolled Grain Oriented Silicon Steel Core (CRGO) or Amorphous Metal Core (AMDT)
Stainless Steel Tanks and Cover
Extra Creep Bushing
Surge Arrester Bracket
The CSP protection package consists of four related components: H.V Fuse Link, Secondary Breaker, Signal light, External Surge Arrester that work together to provide complete self-contained protection against surge currents, short circuits and overloads.
Units can be customized to specific requirements